2
www.uniformation3d.com
Safety Instructions
Always follow the safety instructions during assembly and usage, to
avoid unnecessary damage to the 3D printer or individual injury
If you encounter any problems, please contact customer
support. The QR code and URL are included in this manual.
Be cautious when using the scraper. Always scrap away
from the body and hands.
In case of emergency, please immediately shut off the
power to the printer.
There are moving parts inside the printer, please do not
touch any part of the internal machine while in use.
Safety glasses and gloves should be worn as PPE.
Keep the printer and its accessories out of the reach of
children. Keep uncured resin out of the reach of children.
Vapors or fumes may be irritating. Always use the printer in
an open and well ventilated area or wear a ventilator.
Never expose the printer to the elements such as rain and
To Next Page
Loading...