Unify OpenStage 60 HFA User Manual

127
Using a Bluetooth headset
You can connect a Bluetooth headset to your OpenScape CP600, which is
approved for use with the OpenScape CP600. Ask your administrator about
approved headset types.
Connecting the Bluetooth headset
Prerequisite: The Bluetooth function on your OpenScape CP600 is activated
 page 143.
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Finding and connecting the Bluetooth headset
Now switch your Bluetooth headset to pairing mode (see the user manual sup-
plied with the device).
Paired devices are displayed.
Start the search for new devices with the Softkey. Start or set the paging function
on the Bluetooth device if appropriate.
Located devices are displayed. Repeat the search if appropriate with the Soft-
key.
Select the relevant headset and open with the Softkey.
Confirm the pairing prompt with the Softkey. The Bluetooth device is paired and
added to the list.
or
A pairing PIN is requested.
j Enter the pairing PIN and confirm with the Softkey. The Bluetooth device is
paired and added to the list.
Service/Settings
_
$
User:
-
_
$
Bluetooth
-
_
Paired devices
-
_
Õ
_
Nearby devices
Õ
_
?
Headset
-
_
Accept
Q
_
©
Enter pairing PIN...
Q
_

Unify OpenStage 60 HFA Specifications

General

Brand	Unify
Model	OpenStage 60 HFA
Category	IP Phone
Language	English