Page 12 eVscope eQquinox V1.1
12. Data
Raw data is saved during Enhanced Vision. You can empty your SD card when the
storage is full.
To empty the SD card storage, first select Download
data. Then, when it is done, select Upload my data.
Download data sends data from eVscope to your
smartphone. Upload my data send data from your
smartphone to the Unistellar servers.
You are your observations owner. By sharing
your data with us, you allow Unistellar to provide its
users with continuous improvement of their observation
experience.
It also makes scientific discoveries possible,
for which your contribution will be mentioned if you wish.
As usual in these cases, the results of
analyzes will be the property of those who analyzed it:
Unistellar and its scientific partners.
Safety instructions
Your eVscope eQuinox and its accessories are not toys. Do not allow
small children to play with them because children could hurt themselves
or others or damage your device. Keep your device and all its parts and
accessories out of the reach of small children.
Your eVscope eQuinox is not meant to be used in wet environment. As
every electronics object (as exception of the waterproof ones), if water
or another liquid enters the eVscope it can be permanently damaged.
You should immediately turn off the power and dry it.
Do not look at the Sun without an adapted filter. You eVscope eQuinox
can be definitively damaged also after a short exposure. There is also an
important fire hazard.
Furthermore, do not expose your eVscope at temperatures above 50°C
or below -20°C, the performances can be compromised by extreme
temperatures.
To Next Page
Loading...
