Page 8 eVscope eQquinox V1.1
iii. The Bahtinov mask is included in the cover. To use it you should remove the mask from the cover
and install it on the eVscope, as in the pictures.
iv. In case you need to adjust the coma, use the two screws of the adjustment mechanism (see Mirror
Alignment on next page).
8. Observation:
o
Check the Quick Start Guide for detailed explanations on how to use your eVscope.
9. Park:
o
When you are done observing, use the « Park my eVscope » function so it automatically
moves to the zenith position and turns itself off. First, the tube will go a little further than the
zenith, then it will slowly go back. You will find the option « Park my eVscope » in the « User
» tab
o
Put the dust caps back on the tube.
To Next Page
Loading...
