EasyManua.ls Logo

Unistellar eVscope v1.0 - Maintenance

Unistellar eVscope v1.0
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
1. Storage:
o
Store the eVscope in its original packaging or in its backpack.
o
Store the eVscope with its cover and with the eyepiece cover, in order to avoid dust
to enter in the device.
o
Do not store the eVscope with empty battery.
o
Do not store the eVscope in wet environment and temperatures below -20°C or
above 50°C.
o
Do not store under direct sunlight.
2. Mirror removal and cleaning:
o
The mirror can be removed by removing the 4 screws on the back of the adjustment
mechanism, as in the picture:
o
Gloves must be used in order to manipulate the mirror.
o
Once the back removed the mirror can be cleaned with dry compressed air.
o
No liquids should be used in order to clean the mirror.
o
No wet tissues should be used in order to clean the mirror.
3. Tripod maintenance:
o
The tripod screws could untighten with the use.
o
Three different “tripod tools” are provided in order to tighten the screws of the tripod
in case of loose performance.
4. Battery removal:
o
The battery is not meant to be removed by the user.

Related product manuals