EasyManua.ls Logo

Unistellar eVscope - Accessories

Unistellar eVscope
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specications:
Accessories
Tripod:
Designed for deep sky observations, this tripod has a bubble level at the top of the three leg
locks that can be adjusted to dierent angles, next to where the telescope attaches. Your
observations might be slightly o if your tripod isn’t perfectly level.
IMPORTANT: Tighten the screws on your tripod, but don’t overtighten them, as this could
damage them and make the tripod unstable. Also, make sure that the legs are properly locked
before transferring your telescope to the tripod.
WARNING : The tripod must not be used for any purposes other than for holding your
telescope.
Tripod specications :
Dimensions : 1.93 ft x 0.42 ft - 4.1 ft max height and 3.2 ft max when opened
Weight : 4.41 lbs
!
!
Backpack
The backpack is a separate accessory, not included with the telescope.
How is the telescope backpack made?
The telescope backpack is made using a durable fabric that has been reinforced and
padded with high density foam to protect your telescope..
WARNING: The backpack is not waterproof
Backpack specications :
• Integrated foam inserts that t the shape of your telescope.
• An inside strap to secure the instrument during transport.
A removable rain cover (to protect against rain and moisture) located in the pocket of
the backpack.
• Adjustable padded shoulder straps and belt help distribute the load.
• 5 small inside pockets: 2 with zippers, 2 capable of holding the telescope’s cap
and the eyepiece cover.
Ventilated back panel.
• 2 large outside pockets with zippers and 1 belt-level pocket with a zipper
Dimensions :
2.36 ft x 0.73 ft x 0.95 ft
(H x L x P)
Weight : 4.41 lbs
1
User guide | 11
English

Other manuals for Unistellar eVscope

Related product manuals