HT730 User’s Manual
1.4 Getting Started
1.4.1 Install / Remove the Battery Cover
￭ Install the battery pack and the battery cover
1. Slide and position the battery pack, making sure the battery contacts are
aligned with the contacts in the battery compartment.
2. Make sure the battery release latch is in the unlocked position.
3. Insert the battery cover up to 45 degrees (45°), from bottom to top.
Press the battery cover down to secure in place and then slide the battery
release latch to the locked position.
6
© 2021 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
To Next Page
Loading...
