Unitech HT730 User Manual

HT730 User’s Manual
1.4.2 Charging the Battery
Using the terminal for the first time, you need to charge it for about 24 hours.
For the regular use, you can charge the terminal with the USB type-C cable.
It takes within 4 hours to charge the terminal with the cradle to full capacity.
Connect the type C USB cable to the USB port on HT730 and connect the
other end of the USB cable to AC power adapter. Then plug into the electrical
outlet. It is highly recommended that using the unitech USB type-C cable and
AC power adapter to charge the terminal.
The charging LED indicator on HT730 is turning red when it is in charging state.
The green light is on after the battery is fully charged.
8
© 2021 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners

Unitech HT730 Specifications

General

Brand	Unitech
Model	HT730
Category	Touch terminals
Language	English