Unitech MS100 User Manual

13
MS100 Manual
Aiming Time for Long Range Engine
The Aiming Time function specifies the duration of the Aim Function
(see previous page). Length of duration can be specified from
500ms to 2 seconds, in half-second increments.
Default is “1 second”.
Postamble
Identical to Preamble (above), but characters are inserted after
scanned data. A common postamble would be to insert a “Tab” in
lieu of an “Enter” terminator (see page 11).
Default is “None”
Scanner Port, continued
The above special characters must be bracketed by < > symbols as
shown.
Function codes (F keys, cursor up, Enter, etc.) can also be inserted
via hexadecimal code (accessable in a linked menu) and must
include surrounding brackets (<>).
Letters and numbers should be entered directly by keyboard input
without surrounding brackets (<>).
Default is “None”
Preamble
Insert a string of characters prior to the actual scanned data.
Pre-defined characters include:
•
<>>: >
<<>: <
•
•
<dd>: character in hexadecimal notation
•
<“>: “ (quotation marks)
•
<*>: Interblock Delay
•
<a>: Any Letter
•
<d>: Any Digit
•
<n>: Line Feed
•
<r>: Carriage Return
•
<t>: Tab

Unitech MS100 Specifications

General

Wavelength	660 nm
Sensor type	Photo diode
Tilt reading angle	45 - 90 °
Dimensions (WxDxH)	140 x 30 x 23 mm
Cable length	1.80 m
Standard interfaces	RS-232
Power consumption	800 mA
Power requirements	5V DC
Product color	Black, Blue
Housing material	Plastic
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Weight	76.5 g