20
MS100 Manual
Bar Code Symbologies, continued
Code 11
Maximum Length defines the maximum length the user will
accept for a valid bar code. Default is “48”.
•
Minimum Length defines the minimum length the user will
accept for a valid bar code. Default is “1”.
•
Send Check Digit toggles whether or not to send a check digit.
Default is “No Send”.
•
Check Digit Number defines the check digit correct result to be
either “1” or “2”. Default is “2”.
•
Code ID is a user-definable identification letter for Code 11,
which is referred to in the “Use Code ID” function (see page 11).
Default is letter “J”.
•
Enabled toggles the ability for the keyboard/scanner to read
Code 11 on or off. Default is “No”.
•
Delta Code
Send Check Digit toggles whether or not to send a check digit.
Default is “Send”.
•
Calculate Check Digit toggles whether or not to calculate a
check digit. Default is “Yes”.
•
Code ID is a user-definable identification letter for Delta Code,
which is referred to in the “Use Code ID” function (see page 11).
Default is letter “D”.
•
Enabled toggles the ability for the keyboard/scanner to read
Delta Code on or off. Default is “No”.
•
Supplement Code (for UPC-E, ISBN, EAN-13)
Insert Space Separator toggles whether or not to output a space
between the main and supplemental bar codes. Default is “No”.
•
Must Present toggles whether or not the supplemental bar code
must be present in order to output data. Default is “Yes”.
•
Five Supplement Code toggles whether the five digit supple-
mental bar code is to be recognized. Default is “No”.
•
Two Supplement Code toggles whether the two digit supple-
mental bar code is to be recognized. Default is “No”.
•
To Next Page
Loading...
Need help?
General
Weight and Dimensions
