MS282
2D Imager Barcode Scanner
Quick Start Guide
Factory Default
Version 1.0
401366G
Connecting the Scanner
Connect USB cable to the USB port of a host PC.
* ：Default Option
For more detailed scanner setting, please go to www.ute.com to download the user manual and the
scanner configuration manager utility.
USB Device Type
Reading Mode
Display F/W Version
USB HID Keyboard*
USB CDC Host
SNAPI for SCM Setting
Trigger (Level) *
A trigger press activates decode processing.
Decode processing continues until the bar code
decodes, you release the trigger.
Presentation (Blink)
The engine activates decode processing when
it detects a bar code in its eld of view. After a
period of non-use, the LEDs turn o until the
engine senses motion.
Auto Aim
The engine projects the aiming pattern when
it senses motion. A trigger press activates decode
processing. After two seconds of inactivity the
aiming pattern shuts o.
Auto Aim with IIIumination
The engine turns on the aiming pattern and
internal illumination LEDs when it senses motion.
A trigger press activates decode processing. After
two seconds of inactivity the aiming pattern and
internal illumination LEDs automatically shut o.
To Next Page
Need help?
General
