Unitech MS337 User Manual

S CANNER O PERATION
Character Suppression
Enable the
Suppression of 1 Character
* Disable the
Suppression of 1 Character
³115111 ³115101
To suppress 1 character:
1. Scan the Enter/Exit Configuration Mode bar code, on page 2.
2. Scan the Enable the Suppression of 1 Character bar code.
3. Scan the Character 1 bar code (below left).
4. Scan the three code bytes that represent the character to be suppressed, on page
17.
5. Scan the Enter/Exit Configuration Mode bar code, on page 2.
Enable the
Suppression of 2 Characters
* Disable the
Suppression of 2 Characters
³115112 ³115102
To suppress 2 characters:
1. Scan the Enter/Exit Configuration Mode bar code, on page 2.
2. Scan the Enable the Suppression of 2 Character bar code above.
3. Scan the Character 1 bar code (below left).
4. Scan the three code bytes, on page 17, that represent the
1
st
character to be suppressed.
6.
5. Scan the Character 2 bar code (below right).
Scan the three code bytes, on page 17, that represent the
2
nd
character to be suppressed.
7. Scan the Enter/Exit Configuration Mode bar code, on page 2.
Character 1 Character 2
³915200
³915300
* Factory Default Configuration
16

Unitech MS337 Specifications

General

Brand	Unitech
Model	MS337
Category	Scanner
Language	English