-17- © 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS650 User’s Manual
2.4.2 Delete Last Record
Delete Last Record
To delete ONE stored data, please scan below barcode or press function button.
Clear All Record –
To delete ALL stored data, simply delete the file “BARCODE.txt” in there movable
storage device “MiniScan” until you hear two beeps.
2.4.3 Data Format, Date & Time Setup
The default Data Format for Batch Mode is <Date>, <Time>, <Barcode
Data>below are items and their setup codes:
Data Format
Example:
To change Data Format to <Barcode Data>, <Date>, <Time>
1. Scan [Data Format]
2. Scan [4], [2], [3] on Appendix A.
3. Scan [Data Format]
To Next Page
Loading...
Need help?
General
