Unitech MS852P - LED; Beeper Indicator

12
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
MS852P User’s Manual
1.7 LED / Beeper Indicator
1.7.1 Scanner LED indicator
Description
Indication
Battery charging
Solid Red Light
(LED is in the center of housing)
Battery Low < 10%
Red LED blinking every 2 seconds
(LED is in the outer ring)
Battery Low < 5%
Red LED blinking fast with all other LED
indicators disabled
(LED is in the outer ring)
System Warning /Error
Red LED toggling every second for 5 seconds or
until trigger key pressed
BT is paired and disconnected to the
host
Solid Green Light
Scanner in Auto Presentation Mode
Green LED blinking every 2 seconds
System busy with data scanning
disabled
Green LED toggling every second
BT is connected to the host / cradle &
ready to send data.
Solid Blue Light
Good read
Green LED flashing once
BT in pairing mode
Blue LED toggling every second
BT is connected to the host / cradle
but its signal is too weak to send data
Blue LED blinking fast
Blue LED blinking fast
In scanner Firmware Update Mode
White LED