Unitech PA600 Getting Started

Chapter 3 Getting Connected
30
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
4. Enter the passcode in the Passcode field.
NOTE: On the PC
screen, enter
the Bluetooth
PIN Code
Request.
5. Enter the same Blue-
tooth PIN Code that
was entered in step 4.
6. Select service. Check ActiveSync and tap Finish.
7. Preserve battery power by ending the Bluetooth Microsoft ActiveSync connec-
tion when the synchronization is complete. Tap OK.
8. Tap Start → Programs → ActiveSync.
9. Tap Menu at the bottom right corner of the screen. Select Connect via Blue-
tooth. The terminal connects to the host via Bluetooth Microsoft ActiveSync.

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm