Unitech PA600 Getting Started

Chapter 3 Getting Connected
35
3. Enter the network key. Tap Next.
4. Tap Finish. The Configure Wireless Network
screen appears again, and the new wireless
network becomes available in the list.
Disable the wireless network through one of the following:
1. Double-tap the Wi-Fi icon and tap Disable Wireless.
2. Tap the Wi-Fi bar in the Wireless Manager screen.
3. Simultaneously press Func and 9 to access the Device Setting screen. Under
the IO tab, select Wireless and Disable.

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm