Unitech PA600BT User Manual

C H A P T E R 6
B A S I C I N V E N T O R Y F U N C T I O N S
61
Applying the Collected Physical Inventory Data in the
General Store
Applying the Physical Inventory data is a two step process:
• Step 1 - Set the Physical Inventory file
• Step 2 - Apply the Physical Inventory file.
Step 1 - Setting the Physical Inventory File
Follow these steps to set the physical inventory data data you collected on the PA600.
1. From the General Store main menu click Tools>Unitech Physical.
2. You will see the following menu.
Click the radio button to the left of the “Physical Count w/Match” option.
Enter HTPhys.DAT as the filename, or you can navigate to it using the
browse button to the right of the “From” field. Then click the Process button.

Unitech PA600BT Specifications

General

Brand	Unitech
Model	PA600BT
Category	PDA
Language	English