Unitech PA690 - Connecting PA690 to Your Computer

18
Copyright 2011 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Connecting the Device to Your Computer
1. After ActiveSync has been
installed, connect the PA690 to
your PC as described in
Connecting the terminal to a host
(PC/Notebook).
2. Turn the PA690 on.
3. ActiveSync starts automatically
and configures the USB port to
work with the PA690. The New
Partnership setup wizard
automatically starts.
NOTE: If ActiveSync doesn’t start automatically, click Start Ш Programs Ш
Microsoft ActiveSync.
NOTE: If a message appears indicating that it is unable to detect a connection,
click the Cancel button and manually configure the communication
settings.
4. Follow the on-screen instructions.
5. When the configuration process is
complete, the Active-Sync window
appears.
6. Synchronization will be initialized and will take place if you’ve chosen to
synchronize periodically or upon connection.
NOTE: Your computer can create a partnership with multiple PA690s. Also, a
PA690 can create a partnership with up to two computers.