Chapter 2 Using the Hardware
20
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Using the SIM Card
The PA600’s GPRS SIM Card Slot is inside the Battery Compartment.
Inserting the SIM Card
1. Remove the Battery Cover and the Main Battery. Insert the SIM Card with the
metallic gold side facing up, and with the notched corner facing right, as shown
below:
2. Push the SIM Card inside the slot until it clicks into place. Use a Stylus to push
the SIM Card Slot Lock to the right, as shown below:
To Next Page
Loading...
Need help?
General
