22 23
Volume control
To adjust the volume of your environment when
you are wearing two hearing aids:
• Push the button on your right hearing aid
to increase the volume, and
• Push the button on your le hearing aid to
decrease the volume
To adjust the volume with one hearing aid:
• Push the button to step through your
volume levels
As you change the volume, your hearing aids will
beep.
Volume setting Beeps
Suggested volume level 1 beep
Turning volume up
short beep
Turning volume down
short beep
Maximum volume level
2 beeps
Minimum volume level
2 beeps
Pairing your mobile phone with your
hearing aids
1. On your phone, go to your settings menu to
ensure Bluetooth
®
is on and to search for
Bluetooth-enabled devices.
2. Turn your hearing aids on by
closing the battery door. Your
hearing aids will remain in
pairing mode for 3 minutes.
3. Your phone will show a list
of found Bluetooth-enabled
devices. Select your hearing aid from the list
to pair both hearing aids at once. You will
hear a melody when your phone has been
successfully paired to your hearing aids.
It is only necessary to perform the pairing
procedure once with each Bluetooth-enabled
phone.
Consult your phone user guide for instructions
on pairing a Bluetooth device with your phone.
Bluetooth
®
is a registered trademark owned by the Bluetooth SIG, Inc.
To Next Page
Loading...
