Unitronics UMI-B1 UL Series - Fault Tracking and Troubleshooting; Maintenance Intervals and Procedures

UMI-B1 UL Series Inverter Function parameters
96
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P17.20
AI2 input
voltage
Display analog AI2 input signal
Range: 0.00–10.00V
●
P17.21
AI3 input
voltage
Display analog AI2 input signal
Range: -10.00–10.00V
●
P17.22
HDI input
frequency
Display HDI input frequency
Range: 0.00–50.00kHz
●
P17.23
PID
reference
value
Display PID reference value
Range: -100.0–100.0%
●
P17.24
PID
feedback
value
Display PID feedback value
Range: -100.0–100.0%
●
P17.25
Power
factor of
the motor
Display the current power factor of the motor.
Range: -1.00–1.00
●
P17.26
Current
running
time
Display the current running time of the
inverter.
Range: 0–65535min
●
P17.27
Simple
PLC and
the current
stage of
the
multi-step
speed
Display simple PLC and the current stage of
the multi-step speed
Range: 0–15
●
P17.28
ASR
controller
output
The percentage of the rated torque of the
relative motor, display ASR controller output
Range: -300.0%–300.0% (the rated motor
current)
●
P17.29
Reserved
●
P17.30
Reserved
●