UNITY LAUNDRY SYSTEMS UTS62 - COPY PROGRAM (FORMULA) FROM USB FLASH DRIVE TO WASHER; COPY PARAMETER FROM WASHER TO USB FLASH DRIVE; COPY PROGRAM (FORMULA) FROM WASHER TO USB FLASH DRIVE

36
Part. 14000001 Rev. 04//2021
®/™ ©2021 Unity Laundry Systems. All rights reserved.
USB INTERFACE
12.2 COPY PROGRAM (FORMULA) FROM USB FLASH DRIVE TO WASHER
Press [UP] or [DOWN] button to select “2:ProgFromUSB” and press [ENTER] button.
WelcometoUSB
2:ProgFromUSB
<Enter>=Conrm
Press [ENTER]buttontoconrm.ThisoperationwilluploadalloftheformulasfromUSBFLASHDRIVEtocontroller.
Press [ESC] button to cancel.
Note: The le path of parameter on USB FLASH DRIVE should be: “H:\LDXXX\PARAMETER”.“H” is the U stick
recognized on the personal computer.
12.3 COPY PARAMETER FROM WASHER TO USB FLASH DRIVE
Press [UP] or [DOWN] button to select “3:CopyParaToUSB” and press [ENTER] button.
WelcometoUSB
3:CopyParaToUSB
<Enter>=Conrm
Press [ENTER]buttontoconrm.ThisoperationwilluploadalloftheparametersfromcontrollertoUSBFLASHDRIVE.
Press [ESC] button to cancel.
Note: The parameters will be reserved under the le path: “H:\LDXXX\PARAMETER”. The existing parameters under
this le path will be covered by this one.
12.4 COPY PROGRAM (FORMULA) FROM WASHER TO USB FLASH DRIVE
Press [UP] or [DOWN] button to select “4:CopyProgToUSB” and press [ENTER] button.
WelcometoUSB
4:CopyProgToUSB
<Enter>=Conrm
Press [ENTER]buttontoconrm.ThisoperationwilldownloadalloftheformulasfromcontrollertoUSBFLASHDRIVE.
Press [ESC] button to cancel.
Note: The formulas will be reserved under the le path: “H:\LDXXX\PARAMETER”. The existing formulas under this
le path will be covered by this one.