EasyManuals Logo

Universal Audio 2192 User Manual

Universal Audio 2192
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Specifications
_______________________________________________________________________
- 47 -
Analog:
Inputs
Connectors 2x balanced XLR female connectors
Type DC coupled, dual-differential
Common-mode rejection ratio (CMRR) >90dB
Impedance ~1.5k ohms
Maximum input level +31dBu
Outputs
Connectors 2x balanced XLR male connectors
Type DC coupled, dual-differential
Impedance ~95ohms
Maximum output level +23dBu
Frequency Response (analog input to ADC to DAC +/- 0.1dB, 10Hz to 40kHz, -1dB at 74kHz
to analog output, referenced to 1kHz, Fs = 192kHz) (see page 39)
Analog Level Trim
ADC input (Lo-Z source) Max input for 0dBFS: +30dBu
Min input for 0dBFS: +5.5dBu (3dBV)
DAC output (Hi-Z load) Max output at 0dBFS: +23dBu
Min output at 0dBFS: +4dBu (+1.8dBV)
Factory Trim (accessed via 15-turn, rear-panel mounted potentiometer)
Headroom +18dB
Reference level +4dBu = -18dBFS
Max input/output at 0dBFS +22dBu

Other manuals for Universal Audio 2192

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Universal Audio 2192 and is the answer not in the manual?

Universal Audio 2192 Specifications

General IconGeneral
BrandUniversal Audio
Model2192
CategoryAccessories
LanguageEnglish

Related product manuals