Universal Remote Control R7 User Manual

The R7 Remote Control
IMPORTANT: If vou don't press a button within 20 seconds, the
LED light will turn off and exit the set-up mode and vou will need
to start over.
STEP 3: Press anv button on the R7 that vou want to teach a
command to. For example, if vou want to teach the MUTE
button on the R7, the Mute command from vour old TV remote,
press the MUTE button on the R7 and the TV component
button LED light will blink once indicating that the R7 is readv
to learn the command.
STEP 4: Press and hold the MUTE button on vour old remote
until the component button LED light on the R7 blinks twice.
Now vou can continue learning all other buttons from vour old
remote bv pressing the next button on the R7 and repeating
this step.
Note: The Device LED will blink five times if there was an error in the
learning process. In this case, please repeat Steps 3 and 4.
15

Universal Remote Control R7 Specifications

General

Brand	Universal Remote Control
Model	R7
Category	Remote Control
Language	English