Universal Remote Control R7 - SECTION 3: Learning Method

SECTION 3: The Learning Method
This method allows vou to 'teach' vour R7 the commands from vour
old remote.
STEP 1: Line up the R7 to vour old remote head-to-head as vou see
here. Make sure the heads are one to two inches apart.
P ЭНЕН
°@ 9 000000
STEP 2: On the R7 remote, press 4 =
down on both the component Ж.
button, (such as TV, VCR, etc.), JO COMPONENT
and the ENTER (ENT) button at Buttons
the same time for 3 seconds until
the component LED light turns on.
ENTER (ENT)
Button
14