Universal Remote Control R7 User Manual

The R7 Remote Control
If the Learning Method does not work, here are a few
suggestions:
• If you have a Plasma TV, move to another room.
• Avoid programming under fluorescent light or direct sunlight.
• Put new batteries in your old remote.
e Gradually vary the distance between the two remote controls.
* Tap the button on your old remote instead of
pressing and holding it during the learning process.
See the following notes regarding the Learning process:
e Learned functions override any existing pre-programmed
functions on the remote control.
• All buttons for the seven Component modes сап be learned
except for the LIGHT button.
e Learned functions are automatically erased when a new
function is learned on the same button.
e Learned functions are retained even after a different Set-up
Code number is programmed into the remote control.
“То return to an original pre-programmed function, a learned
function must be erased.
17

Universal Remote Control R7 Specifications

General

Brand	Universal Remote Control
Model	R7
Category	Remote Control
Language	English