Universal Remote Control R7 User Manual

The R7 Remote Control
Pre-Programmed Code Tables
The R7's Pre-Programmed code librarv is classified bv categorv (TV, VCR,
AUX, etc.). Each categorv actuallv includes manv tvpes of components. For
example, the SAT categorv includes satellite receivers and digital video
recorders like TiVo and Replay. (Reference the legend below.)
Within each category, the code numbers are listed in rows by brand (Sony,
Panasonic, B & K, etc.). Some brands have more than one three digit code
for you to try. Just circle the correct row and refer to it while you setup.
AUDIO
CD
DVD
AUX
CABLE
SAT
VCR
Amps, Preamps and A/V Receivers
CD Plavers and Changers
DVD Plavers and DVD
Recorders
Lighting Controls, Custom
Installation Products, Multimedia
PC Controls
Cable TV Tuner/Descrambler
Satellite Receivers, TiVo,
Replay and other DVR Receivers
TVs, Plasmas,
Projectors and Monitors
VCRs and TV/VCR Combos
pages 34-37
pages 38-40
pages 41-44
pages 45-47
pages 48-53
pages 48-53
pages 54-60
pages 61-65
NOTE: Following each Code Table is a Command Locator. Use the
Command Locator to locate additional commands.
33

Universal Remote Control R7 Specifications

General

Brand	Universal Remote Control
Model	R7
Category	Remote Control
Language	English