Universal Remote Control URC-SR3 User Manual

Factory Reset
You can reset your remote to the original
factory default settings.
Press and hold both the [CABLE/SAT] and
RECORD [REC] buttons for about five
seconds until the [CABLE/SAT] component
LED light blinks five times. All programming
and set-up codes that you have entered into
the remote will be erased and the URC-SR3
will return to the original factory default
settings.
Warning
This procedure will erase all programming
and set-up codes that you have entered
into the remote.
Page | 32

Universal Remote Control URC-SR3 Specifications

General

Brand	Universal Remote Control
Model	URC-SR3
Category	Remote Control
Language	English