Universal Space DUO DRIVE - Cabinet Installation; Set up & Installation

 DUO DRIVE V1.02

7
4. SET UP & INSTALLATION
4-1 Cabinet Installation
Note: 1. According to the above instructions to
connect the L&R POP board to the main cabinet
2. According to the above instructions to
connect the seat assembly to the main cabinet.
3. Fasten two parts with 5 hexagon round head
screws (M4X20).
1. Use the key to open the
ri
g
h
t
t
i
c
k
et
door
.
2. Fine the cable from the base at the right corner.
3.Pull the cable through the
small hole of the main cabinet at
the bottom.
4. Connect the cable.
5.Installation is finished.