Need help?Do you have a question about the UNIVIEW NVR201-04E and is the answer not in the manual?
General| Brand | UNIVIEW |
|---|---|
| Model | NVR201-04E |
| Category | Network Hardware |
| Language | English |
Guides users on how to perform the first-time login with default credentials.
Covers the process of adding, managing, and configuring IP cameras or video servers.
Guides on controlling PTZ camera functions like pan, tilt, zoom, and focus.
Covers saving and recalling specific camera positions for PTZ cameras.
Explains how to create and manage patrol routes for PTZ cameras.
Configures video encoding parameters like resolution, bitrate, and frame rate.
Allows users to schedule video recording for specific times and days.
Enables and configures motion detection as a recording trigger.
Sets up recording triggered by external alarm inputs.
Plays back the most recent video recordings from the last few minutes.
Allows playback of recordings filtered by camera and specific dates.
Allows playback of recordings filtered by specific event types.
Provides efficient review of recordings based on smart search results like motion.
Describes the process of backing up video recordings to a USB storage device.
Configures external alarm inputs and outputs for triggering actions.
Sets up actions like buzzer, email, or recording triggered by alarms.
Enables and configures motion detection for cameras to trigger events.
Sets fundamental network parameters like IP address, subnet mask, and gateway.
Sets general system parameters like device name, language, and password.
Resets the NVR settings to factory defaults, either partially or completely.
Explains how to upgrade the NVR system firmware via local or cloud methods.
Guides on how to properly shut down, restart, or log out of the NVR.
Details how to log into the NVR using a web browser.
Describes the Live View page display and control buttons for real-time video.
Provides access to various configuration menus for the NVR via the web interface.
To Next Page
