Need help?Do you have a question about the UNIVIEW NVR208-32 and is the answer not in the manual?
Guides through essential system setup, including language, password, and network.
Instructions for initial login and security recommendations for the NVR.
Explains icons indicating alarms, recording status, and two-way audio in the preview.
Details buttons available in the preview window for camera control and functions.
Guides on modifying preview settings, including output, resolution, and camera linking.
Procedures for adding, managing, and deleting IP cameras or video servers.
Covers editing IP device details, deleting devices, and using advanced settings.
Adjusts image parameters such as contrast, hue, saturation, and brightness.
How to operate PTZ cameras using the dedicated toolbar for pan, tilt, zoom, and focus.
Steps to set and recall specific camera positions and states for PTZ cameras.
Configuration of video encoding parameters, including resolution, bitrate, and frame rate.
Setting up video recording based on a time schedule for different cameras.
Enabling and configuring motion detection to trigger video recording.
Setting up recording triggered by external alarm inputs or events.
Reviewing recordings efficiently using smart search results, highlighting detected motions.
Saving recorded video from the NVR's hard disk to a USB storage device.
Configuring alarm inputs and outputs, trigger modes, and actions.
Setting up motion detection to trigger alarms and record events.
Setting up essential network parameters like IP address, subnet mask, and gateway.
Restoring system settings to factory defaults, either fully or partially.
Upgrading the NVR firmware via local USB or cloud.
Instructions for logging into the NVR's web interface using a browser.
General| Brand | UNIVIEW |
|---|---|
| Model | NVR208-32 |
| Category | Network Hardware |
| Language | English |
To Next Page