26
Setting and starting the cooking cycle
12
Set one or more than one cooking steps
1
Set the cooking parameters of step 1 as required:
■ cooking time
■ temperature
■ percentage of microwave use
■ fan speed
■ function MULTI.Product For more details, see p. 17.
2
For perfect results every time, you can use UIP technology for de-
tails go to p. 17 or enter notes (e.g. add oil) at the end of the set
steps p. 28.
3
If necessary, set up to nine other cooking steps in the same way.
Each can be characterised by different cooking parameters. The
appliance automatically passes from one cooking step to the next, if
present.
After having set all the parameters (time, temperature, etc.), you can:
■ start the cooking cycle directly without saving it p. 29
in this case the parameters set are not saved and must be entered
during each subsequent cooking cycle;
■ savethe set recipe and then start a cooking cycle p. 30
this means that the recipe can be used later, at any time, without
having to reset the parameters each time.
To Next Page
Loading...
Need help?
General
