52
Setting and starting the cooking cycle
28
Set one or more than one cooking step
1
Select manual cooking by tapping the “SET” icon.
2
Set the cooking parameters as required:
■ cooking time
■ temperature (the oven will suggest the SPEED cooking tempera-
ture set previously. However this value can be modified if necessary)
■ percentage of microwave use
■ fan speed
■ function MULTI.Product For more details, see p. 17
3
For prefect results every time, you can use UIP technology For
more details, see p. 17.
After having set all the parameters (time, temperature, etc.), you can:
■ starting the cooking cycle directly without saving it
in this case the parameters set are not saved and must be entered
during each subsequent cooking cycle.
29
To start cooking, tap and continue from p. 29 (the
images shown on these pages refer to a traditional BAKE cooking
cycle but the concept remains the same).
■ save the set recipe and then start cooking p. 30 (the images
shown on these pages refer to a traditional BAKE cooking cycle but
the concept remains the same). This means that the recipe can be
used later, at any time, without having to reset the parameters each
time.
To Next Page
Loading...
Need help?
General
