2. Preliminary activities
Trolley models
Trolley Extraction and Feet
adjusting for trolley inserting:
- The trolley is positioned inside the oven
and fixed with two lateral screws in order
to ensure a safe transport. Before
removing the trolley, unfix the two screws
as shown on the picture.
- One of the two frontal feet must be fixed
to ensure the basic height already pre
setted to 173 mm. Looking one of the
frontal fixed foot the other three can be
therefore adjusted.
Trolley extraction
Feet adjusting for trolley inserting
173 mm
- 12
+ 12
11
To Next Page
Loading...
