12. Unox condensation hood
Installation
- Positioning:
- Place the hood on the top of the
oven and fix it with the screws
supplied.
-To fix the front part of the hood to
the oven use the proper self-tapping
screws that you find on the top front
part of the oven.
- To fix the back part of the hood to
the oven use the fixing screws that
you find on the top back part of the
oven.
- Electrical Connection: The appliance
must be connected to the ground line
of the network.
- Water Connection:
- It is necessary to place a mechanical
filter and a shut-off valve between the
water system and the appliance.
- As required by current laws, the
appliance is equipped with 2 meters of
pipe, the respective pipe fitting (3/4”)
with non-return valve and mechanical
filter.
- Before connecting the water pipe to
the appliance please let some water
flow to clear the pipe of any
obstructions.
Positioning
40
To Next Page
Loading...
Need help?
General