Need help?Do you have a question about the Unox XVC-XBC and is the answer not in the manual?
General| Model | XVC-XBC |
|---|---|
| Temperature Range | 30°C - 300°C |
| Control Type | Digital |
| Dimensions | 850 x 890 x 750 mm |
| External Dimensions | 850 x 890 x 750 mm |
| Steam Generator | Yes |
| Humidity Control | Yes |
| Programmable Recipes | Yes |
| Capacity | 10 GN 1/1 pans |
| Number of Shelves | 10 |
Explains common warning and informational symbols used in the manual.
Essential safety rules and basic operating procedures.
Using the control panel, setting parameters, and managing programs.
Built-in functions, MAXI.Link, communication, and cooking principles.
Safety, transport, and general installation guidance for installers.
Detailed instructions for electrical, gas, plumbing, and exhaust connections.
Information on connecting accessories, stacking, and product certification.
Details intended uses and restrictions for the appliance.
Specific safety advice for gas-powered ovens.
Safety precautions during oven operation.
Guidelines for maintaining and cleaning the oven.
Safety during installation and repair tasks.
Basic operational guidelines and energy saving tips.
Details the terms and conditions of the product guarantee.
Identifies control panel components and interaction methods.
Procedures for powering the appliance on and off.
How to manually control cooking and select parameters.
How to set cooking time or monitor internal food temperature.
Explains how to set the cooking time for a step.
How to use the core probe to set internal food temperature.
How to set oven cavity temperature or Delta T.
How to set internal oven temperature or Delta T value.
How to adjust humidity (STEAM.Maxi) or drying (DRY.Maxi).
Details the STEAM.Maxi technology for steam cooking.
Explains the DRY.Maxi technology for humidity extraction.
How to adjust fan speed and operating modes.
How to start and stop cooking cycles.
How to start and stop cooking processes.
Guides on moving between cooking steps.
Step-by-step guide for setting time and temperature.
How to cook using core temperature with cavity temperature.
How to cook using core temperature and Delta T.
How to create, save, and run custom cooking programs.
How to recall the last used cooking cycle.
Information on the Rotor.KLEAN washing system.
How to use the program to cool down the oven cavity.
How ADAPTIVE.Clima technology works and how to use it.
Overview of suggested automatic cooking settings.
How to manage multiple UNOX appliances from one control panel.
Tips for achieving optimal cooking quality and browning.
Guidance on preheating, tray types, spacing, and food loading.
Correct placement of the core probe for accurate readings.
Explains how the oven displays warnings for malfunctions.
Lists specific warning messages and their troubleshooting.
Specific warning codes for the control board.
How the oven signals critical errors requiring shutdown.
Lists alarm codes indicating critical failures and shutdown.
Lists alarm codes specific to the control board.
Steps to take before calling customer service for malfunctions.
Crucial safety rules for installation personnel.
Safety precautions specific to gas appliance installation.
Outlines the 5 main stages of oven installation.
Steps for site preparation and initial placement.
Instructions for removing protective film and core probe silicone.
Guidance on fitting feet and installing the drip drawer.
Important warnings about appliance placement and clearances.
Recommendations for placing tabletop ovens safely.
How to adjust the oven door closure mechanism.
Table of appliance weights and support surface requirements.
Safety advice for securing appliances on mobile supports.
Specific instructions for trolley models, including extraction and feet adjustment.
Steps for inserting trolley and door closure panel.
Precautions for floor conditions and ramp use.
Warnings about trolley positioning and movement.
General warnings for electrical connections.
Advice on wire colour coding and connection safety.
Explains the requirements for equipotential bonding.
Warnings about ventilation, gas connection, and exhaust.
How to perform a seal test on connections.
Methods for disposing of exhaust gases.
How to connect the gas supply using pipes or hoses.
General gas setup and nozzle replacement/adjustment.
How to change the gas type setting on the control panel.
How to check heating capacity and gas connection pressure.
How to perform an operational check after installation.
Instructions for connecting the water supply.
Requirements for water quality and recommendations for treatment.
Instructions for connecting the water drainage system.
To Next Page