English
Inserting the trolley and positioning the door closure panel:
To insert the tray rack trolley into the oven, slide it in using the runners on the underside of the oven.
Caution!
The trolley may be hot, and should only be handled while wearing suiable protective garments.
On the central lower part of the oven front there is a micro switch; the oven turns of only when the trolley is
placed inside the cooking chamber or when the door closing panel is placed as described here above.
It is suggested to use the door closing panel during pre-heating or washing programs.
To the door closing panel positioning proceed as follows:
A B C D
1
3
2 4
- Open the oven door and hook the panel (1) by making the lateral holes (2) matching the hooks (3) on the
lower front of the oven (Pictures A, B, C).
- As the drip tray is full, wait for the oven to cool down, grasp the drip tray by the hand grip (4) and empty it
over the drain placed on the bottom of the oven cooking chamber (Picture D).
Caution! the drip tray back surface may be hot and cause burns.
BakerTop trolleys are not equipped with drip tray while ChefTop trolleys have the drip tray as standard
feature. For this reasong it is suggested to use the door closing panel, being equipped with a drip tray collects
the liquids that condense on the internal glass of the oven door.
40
Positioning
To Next Page
Loading...
Need help?
General