English
BakerTop
™
ChefTop
™
Trolley models
Preliminary action – Trolley Extraction
The trolley is positioned inside the oven and fixed with two lateral screws in order to ensure a safe
transport. Before removing the trolley, unfix the two screws as shown on the picture:
Feet adjusting for trolley inserting
To ensure the correct positioning of the trolley inside the oven it’s necessary to check and possibly adjusting
the feet height.
One of the two frontal feet must be fixed to ensure the basic height already pre setted to 173 mm. Looking
one of the frontal fixed foot the other three can be therefore adjusted. See the example bellow:
173 mm
-12
+12
Make sure that the diagonal lengths of the oven opening are identical.
If they are not, fix the adjustable feet as necessary.
Caution!
Make sure that the tray rack trolley can move easily and that there is no
obstruction when sliding it into and out of the oven: sudden movements
may result in hot liquid or food spilling out, which could cause burns.
Positioning
39
To Next Page
Loading...
Need help?
General