Safety information for
maintaining the
appliance
Any routine maintenance must be performed:
• after disconnecting the appliance from the
power supply and waiting for the capacitive
components to discharge (approx. a few
minutes);
• after waiting for the appliance to cool down fully;
• in perfect psychophysical shape;
• after putting on suitable personal protective equipment
(e.g. heat-resistant rubber gloves, eye protection, dust mask
(optional), etc.).
Carefully read the product safety data sheet before
handling and using the detergent. Never touch the
detergent with bare hands. The detergent must not come
into contact with the skin, eyes or mucous membranes.
In case of contact with the detergent, follow the
instructions on the safety data sheet.
When cleaning any component or accessory NEVER use:
• abrasive, pointy or sharp tools or cloths (abrasive
sponges, scrapers, steel-bristled brushes, etc.);
• steam or pressurised water jets;
• abrasive or powder detergents;
To Next Page
Loading...
Need help?
General