Clean the air lter and tray
• Remove air lter “C” from its magnetic housing and apply
UNOX’s SPRAY&Rinse detergent to the whole surface;
• leave for 10 minutes. Rinse thoroughly and dry with a
clean cloth. Do not wash the air lter in the dishwasher;
• put the lter back in place. CHEFTOP-X
TM
/BAKERTOP-X
TM
does not work without the suction lter. There is a sensor to
detect when it is there and warn you to put it back if it is not.
The lter must be completely dry before starting the
appliance;
• if necessary, remove any residue from tray “D” and clean it
using a soft cloth dampened with warm, soapy water.
To Next Page
Loading...
Need help?
General