Cleaning the external parts
• Wait for the appliance to cool down fully;
• close the oven door and clean the external steel surfaces
with a soft cloth, dampened with soapy water. Take care to
avoid seepage under the control panel;
• rinse and dry carefully. Wipe steel surfaces regularly with a
soft cloth doused in Vaseline oil to protect them.
Cleaning the control panel
Clean the control panel with a soft cloth and a little
detergent designed for cleaning glass. For how to clean,
follow the detergent manufacturer's instructions.
Cleaning the oven cavity
Manual cleaning (method not recommended)
• Wait for the appliance to cool down fully;
• spray a suitable amount of UNOX SPRAY&Rinse onto steel
surfaces, without using too much (during these operations
wear personal protective equipment);
• DO NOT spray the product on the door seal as this may
cause damage over time. By using this detergent, you are
guaranteed excellent cleaning results. The product is fully
compatible with the materials this appliance is made from.
Alternatively, only use warm soapy water;
• then, rinse carefully and thoroughly with a damp cloth to
remove any traces of detergent. Dry with a clean cloth or
kitchen roll.