Unox XECL-2013-YPRS User Manual

153
OVEN
3 mm
7 mm
A
floor standing units: A= 4mm
countertop units: A= 7 mm
Test to do

Proper position of
the electrodes
Test 5
Remove the burner and check the following:
Check the gap between the ignition and flame detection electrodes (see Figure 28) and (see Figure 29)
Test the electrical continuity of the electrodes with the multimeter set to ohm.
146
Figure 29
How to set the proper positioning of the electrodes

Unox XECL-2013-YPRS Specifications

General

Brand	Unox
Model	XECL-2013-YPRS
Category	Commercial Food Equipment
Language	English