18
3.2 Conguration Instructions
1. Function configuration of F20 smart sintering furnace:
Sintering program: 20 programs can be freely set by the user
Easy to search when sintering.
Number of
crucibles:
Three layers of sintering tray can be placed at the same time,
Furnace mode: Lifting open type
Heating method: Heating evenly on all sides
Maximum heating
temperature:
1600℃
Temperature
measuring
element:
Type B thermocouple
Heating element:
Four ultra-pure
Four ultra-pure silicon molybdenum rods
Operation mode: 7 inch true color touch screen
Short-time power
o but continuous
burning:
If the temperature drops less than 150 ° C during power o, the
sintering can be automatically continued when the power on.
Hearth down
automatically
during cooling:
After cooling down to 800 ℃ , the hearth automatically goes
down.
Increase the cooling rate and save the sintering time.
Screen saver
popup
Large words on the screen saver displays the remaining time of
sintering, the real-time temperature of the furnace, and
automatically adjustment of the target temperature, which can
be observed at a distance.
Trouble popup
When a fault occurs, a pop-up window can be displayed in time
to show the fault code, and the corresponding
problem of the fault code can be found on the screen warning
page, which is convenient for maintenance.
False triggering
recovery
If any misoperation, sintering recovery can be carried out when
the temperature drops less than 150℃
To Next Page
Loading...