Uponor A3040654 - Programming Menus and Settings; Navigating Programming Menus; Adjusting Settings

Single-zone snow melt control installation and operation manual | 13
Programmable settings
Programming menus
Press and hold the Home button for 3
seconds to enter the programming menus.
The control returns to the last programming
menu previously used.
Select a programming menu
• Touch NEXT to advance
(clockwise in below illustration)
to the next menu.
• Touch BACK to go backwards
(counterclockwise in below illustration)
through the menus.
• Touch ENTER to enter a menu.
Setting items
• Touch or arrows to adjust the setting
if required.
• Touch NEXT ITEM to advance to the next
item within the menu.
• Touch BACK ITEM to go backwards to
the previous item within the menu.
• To return to the parent menu after
changing a setting, press and release
the Home button.
• To return to the Home screen, press and
release the Home button twice or wait
30 seconds to automatically return to
the Home screen.
Press and hold for
3 seconds to access
the programming menus.