What to do if my Uponor Thermostat shows error E1?
If your Uponor Thermostat displays the E1 error, it indicates that the remote floor probe is either not connected, incorrectly wired, or faulty. Ensure the probe is properly connected and correctly wired. If the issue persists, the probe may be faulty.
What to do if my Uponor Comfort-E shows error E2?
If your Uponor Thermostat displays the E2 error, it means that the remote air probe is either not connected, incorrectly wired, or faulty. Check that the probe is properly connected and correctly wired. If the problem continues, the probe may be faulty.
General| Brand | Uponor |
|---|---|
| Model | Comfort-E |
| Category | Thermostat |
| Language | English |
Provides essential safety measures and warnings for operating Uponor equipment safely.
Guidance on the environmentally responsible disposal of the product as WEEE.
Step-by-step instructions for mounting and connecting the thermostat to the wall.
Details the various icons and indicators displayed on the thermostat's LCD screen.
Instructions on how to power the thermostat on and off using the dedicated button.
Guides users through setting the current time and date on the thermostat.
Explains how to view both room and floor temperatures based on sensor configuration.
Details how to program daily heating schedules with different comfort levels.
Explains how to activate and deactivate the keypad lock to prevent unauthorized changes.
Details how to adjust the set temperature manually, with notes on programmable and non-programmable modes.
Allows manual override of the program for a set duration and temperature.
Enables setting a reduced temperature for periods away, resuming normal schedule upon return.
Describes how to activate frost protection mode to prevent freezing temperatures.
Overview and explanation of advanced settings that can be adjusted for custom operation.
Lists and explains various error codes that may appear on the thermostat display.
Instructions for recalibrating the thermostat's temperature sensor settings.
Details the steps to perform a factory reset, restoring all settings to default values.
Provides key technical specifications for the Uponor Comfort-E Thermostat Dig. Prog Set T-86.
Presents the physical dimensions of the thermostat unit with diagrams.
Illustrates the electrical connections for the thermostat, sensors, and heating system.
To Next Page