14 15
MAINTENANCE
Each multiple-use adhesive can last for several
weeks with proper cleaning and maintenance.
When needed, the adhesives should be
cleaned with the alcohol pads included in
the box, or any standard alcohol pad. You
can also clean with a few drops of water and
some soap.*
After cleaning, make sure to let the adhesive
dry off before attaching it to your skin.
To ensure the cleanliness of the adhesive in
use, we recommend placing your device in
the travel case whenever you are not using it.
UPRIGHT GO ADHESIVES
REPLACEMENT INSTRUCTIONS
1. Remove the old adhesive from the
UPRIGHT GO and take a new adhesive.
2. Peel off only the blank side and attach to
the device.
3. Once you are ready to train, peel off the
green ”SKIN” side and attach the device to
your upper back, directly on the spine.
* The UPRIGHT GO is not water proof, so make sure
water does not enter the USB port.
You can always order more adhesives on our website:
www.uprightpose.com
To Next Page
Loading...
Need help?
General