UPS Valencia User Manual

12 x 16 Flat Top Pergola
ASSEMBLY GUIDE
OPTIONAL ACCESSORIES:
A) Bolt Down Bracket Kit (3 for Pergola) D) Tall Base Molding
B)12 x 16 Additional Shade Slat Kit E) Short Base Molding
C) Pergola Planter F) 12 x 16 Canvas Weave Kit
C
A
B
D E F

UPS Valencia Specifications

General

Brand	UPS
Model	Valencia
Category	Outdoor Furnishing
Language	English

Summary

Introduction and Overview

Getting Started with Pergola Assembly

Initial guidance for assembling and installing the pergola kit.

Planning and Preparing for Installation

Advice on site selection, checking for utilities, and local codes.

Pergola Product Restriction of Use

Important limitations regarding additional weight loads on the product.

Pergola Materials Overview

Pergola Materials Breakdown

Pergola Additional Materials List

STEP ONE: Wood Post Layout and Installation (In-Ground)

Layout and Marking Pergola Posts

Measure and mark post locations using string lines and stakes.

Installing In-Ground Wood Posts

Excavate holes, set posts, and secure with concrete.

OPTIONAL STEP: Pergola Post Installation with Bolt Down Brackets

STEP THREE: Vinyl Column Assembly and Installation

STEP FOUR: Main Support Beam Assembly (Wall Side)

STEP FIVE: Rafter Assembly Process

STEP SIX: Main Support Beam Assembly (Posts Side)

STEP SEVEN: Pergola Ledger Boards Installation

STEP EIGHT: Main Support Beams and Rafters Placement

STEP NINE: Fastening Decorative Pergola Caps

STEP TEN: Shade Slat Assembly

STEP ELEVEN: Shade Slats Installation Guide