UPS Valencia - STEP NINE: Fastening Decorative Pergola Caps

Fastening Decorative End Caps & Post Caps
17
12 x 16 Attached Flat Top Pergola
Install decorative pergola end caps using vinyl weld.
Install the post caps using vinyl weld.
Final position your post trims.
1
2
3
2
1
To position post trim in place:
1. Slide the post trim down.
2. Apply a generous amount of vinyl glue around the post
3. Slide the post trim back up to the desired location and
allow a few minutes for glue to cure.
To glue decorative end caps place:
1. Apply a generous amount of vinyl glue to the decorative end caps as shown.
2. Slide the decorative end caps into the beam/rafter and allow a few minutes
for glue to cure.
3
STEP NINE