64 DS1717-020B
8.12 How to change video door phone voicemail settings
To change video door phone voicemail settings:
• Turn on the screen, if off, by tapping it at any point or by pressing the centre button on the 1717/31 or
/33 Video door phone.
• If your current page is not the video door phone page, tap the icon to access the Top Page
and then the icon for the video door phone.
• Tap the icon at the top right to go to the video door phone general configurations page:
• Tap the writing Video Voicemail. A window opens listing with the various Voicemail settings (to the
right of each setting the current value is shown; in the case of Audio Message, date and time of
recording are shown):
o Recording Time, i.e. the max duration of the audio/video message (between 10 and 20
seconds).
o Audio Message, i.e. the personalised audio message that is played at the outdoor calling
station when video door phone voicemail is activated.
o Play Audio Message allows the audio message to be enabled or disabled when the video door
phone voicemail is active. If it is disabled no message will be played at the outdoor calling
station.
o Play Beep, to enable or disable the beep sound at the end of the audio message (if you disable
the audio message the beep will also be automatically disabled).
• Tap the setting that you wish to change. According to the chosen setting, a pop-up window will open
where you can:
o Edit the recording time of the audio message.
o Record and replay the existing audio message. A new message will overwrite the existing one.
The icon can be used to delete the existing message.
o Enable or disable playing of the audio message (disabling does not delete the existing
message, which can be re-enabled later on).
o Enable or disable the end beep.
• Select the required setting or tap the X icon at the top right to close the window without making any
changes.
To Next Page
Loading...
Need help?
General
