urmet domus IPerCom - Page 30

Interfacing IPerCom lock output to iPassan access control system
iPassan panel mount reader
Interfacing IPerCom lock output to iPassan access control system
The
relay which triggers the exit switch input of the
controller. The
programmed to 1 second and the actual door open
time required is programmed via the
iPassan panel mount reader
Interfacing IPerCom lock output to iPassan access control system
F v 5 1 0 0
F D - 0 2 0 -1 6 6
The
IPerCom
relay which triggers the exit switch input of the
controller. The
programmed to 1 second and the actual door open
time required is programmed via the
iPassan panel mount reader
Interfacing IPerCom lock output to iPassan access control system
F v 5 1 0 0
+
-
IPerCom
lock output is connected to the 788/100
relay which triggers the exit switch input of the
controller. The
IPerCom
programmed to 1 second and the actual door open
time required is programmed via the
SE+
SE-
SE2
C
NC
NO
V
-
V+
ILL
PA
SP
AD/ILA
V3
V5
iPassan panel mount reader
Interfacing IPerCom lock output to iPassan access control system
lock output is connected to the 788/100
relay which triggers the exit switch input of the
IPerCom
lock time should be
programmed to 1 second and the actual door open
time required is programmed via the
SE2
AD/ILA
Interfacing IPerCom lock output to iPassan access control system
lock output is connected to the 788/100
relay which triggers the exit switch input of the
lock time should be
programmed to 1 second and the actual door open
time required is programmed via the
iPassan
-
+
The 788/100 is a miniature
relay designed to fit inside
the 1060/74 back box
Interfacing IPerCom lock output to iPassan access control system
lock output is connected to the 788/100
relay which triggers the exit switch input of the
iPassan
lock time should be
programmed to 1 second and the actual door open
iPassan
(or third
Pt No
SE-
SE+
788/100
The 788/100 is a miniature
relay designed to fit inside
the 1060/74 back box
26
Interfacing IPerCom lock output to iPassan access control system
lock output is connected to the 788/100
iPassan
programmed to 1 second and the actual door open
(or third
NO
COM
-
-
NC
The 788/100 is a miniature
relay designed to fit inside
the 1060/74 back box
26
Interfacing IPerCom lock output to iPassan access control system
–
The 788/100 is a miniature
relay designed to fit inside
1104/921 iPassan controller or
1104/926 iPassan 2
R+/D+
Use this method to interface to
any access control system; the
lock output of the IPerCom
entry panel is connected to the
788/100 relay. This relay C and
NO connections
switch input of the access
control
control system to control the
release or maglock
1104/921 iPassan controller or
1104/926 iPassan 2
R-/D-
REX+
Use this method to interface to
any access control system; the
lock output of the IPerCom
entry panel is connected to the
788/100 relay. This relay C and
NO connections
switch input of the access
control
system. Use the access
control system to control the
release or maglock
1104/921 iPassan controller or
1104/926 iPassan 2
-
Reader expansion card
REX-/DC-
DC+
Use this method to interface to
any access control system; the
lock output of the IPerCom
entry panel is connected to the
788/100 relay. This relay C and
NO connections
trigger the exit
switch input of the access
system. Use the access
control system to control the
release or maglock
1104/921 iPassan controller or
Reader expansion card
C
NC
Use this method to interface to
any access control system; the
lock output of the IPerCom
entry panel is connected to the
788/100 relay. This relay C and
trigger the exit
switch input of the access
system. Use the access
control system to control the
1104/921 iPassan controller or
Reader expansion card
NO
Use this method to interface to
any access control system; the
entry panel is connected to the
788/100 relay. This relay C and
trigger the exit
system. Use the access
control system to control the